Search results for "width [beam]"
showing 10 items of 168 documents
High-Speed Machines: Typologies, Standards, and Operation under PWM Supply
2018
This paper presents an overview of the most recent state of the art in the field of high-speed electric machines fed through high-frequency converters. This type of systems is rapidly wide spreading in aeronautical and automotive applications, as well as microturbines. Each typology has its own advantages and downsides, which are analytically presented in this paper. Some types of high-speed electric machines require high-frequency voltage supply, highly stressing the dielectric materials of the winding insulation system. For this reason, in high-speed electric drives, premature failure may occur and a reduction of the total system reliability has been observed in the past years. Such issue…
Raman spectroscopy of synthetic, geological and biological vaterite: a Raman spectroscopic study
2009
Raman spectroscopy was used to study vaterite samples of biological, geological and synthetic origin. The Raman band positions and the full width at half-maximum (FWHM) of the lattice modes and the internal modes of the carbonate ion of all specimens show no significant differences between vaterites of different origin. With increasing Mg concentrations, synthetic vaterite samples show increasing FWHM in the region of the lattice modes and the three ν1 bands, whereas no change in luminescence was detected. In contrast, in situ measurements of vaterite areas in freshwater cultured pearls (FWCPs) by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) together with the Rama…
Control of Power Converters with Hybrid Affine Models and Pulse-Width Modulated Inputs
2021
In this paper, hybrid dynamical systems theory is applied to the analysis and control of switched converters with Pulse-Width Modulated (PWM) inputs. The system is described by a state-space model with continuous flows and discrete jumps, without averaged equations. The modulation effects are captured in full without using time-dependent signals, by enlarging the state vector to include the PWM waveform generation process. Furthermore, the sample-and-hold mechanism associated with the sampling frequency is also taken into account with this approach. A control law is proposed based on a Lyapunov function candidate. Furthermore, convergence sets and the steady state jitter, inherent to PWM-ba…
Wide range excitation of visible luminescence in nanosilica
2010
The visible luminescence of nanometer-sized silica particles (7 nm mean diameter) was investigated using time resolved spectroscopy. This luminescence is characterized by a wide excitation in the visible and ultraviolet range. The emission spectrum is centred at 2.72 eV with a full width at half maximum of 0.70 eV when excited above 3.5 eV, whereas it progressively empties on the high energy side when excited below 3.5 eV. Moreover, the lifetime falls in the ns timescale and decreases on increasing the emission energy. These features are due to the exceptionally broad inhomogeneous distribution of the emitting centres peculiar to the silica nanoparticles. © 2010 Elsevier B.V. All rights res…
Characterization of Different Cable Ferrite Materials to Reduce the Electromagnetic Noise in the 2–150 kHz Frequency Range
2018
The gap of standardization for conducted and field coupled electromagnetic interferences (EMI) in the 2–150 kHz frequency range can lead to Electromagnetic Compatibility (EMC) problems. This is caused by power systems such as Pulse Width Modulation (PWM) controlled rectifiers, photovoltaic inverters or charging battery units in electric vehicles. This is a very important frequency spectral due to interferences generated in a wide range of devices and, specifically, communication problems in the new technologies and devices incorporated to the traditional grid to convert it into a Smart Grid. Consequently, it is necessary to provide new solutions to attenuate this kind of interference, which…
Resonance Raman of oxygen dangling bonds in amorphous silicon dioxide
2016
We investigate the origin of a resonance Raman band induced by ionizing radiation in amorphous silicon dioxide (silica glass), which can be detected under ultraviolet laser excitation. A silica sample, rich of oxygen-excess related defects, was prepared by treating some length of a pure-silica-core multimode fiber in an O2 atmosphere (at high temperature and pressure) and by irradiating it with X-rays at 10 MGy(SiO2) dose. A micro-Raman study revealed a gaussian band peaking at 896 cm−1 with a full width at half maximum of 32 cm−1, which could be detected by exciting the sample with the 325-nm line of a HeCd laser. This spectral feature is absent in the Raman spectra performed with the 442-…
Absolute crystallinity and photocatalytic activity of brookite TiO2 samples
2017
Abstract This study reports a method to determine the absolute crystallinity of partly crystalline brookite TiO2 photocatalysts. A natural, a commercial and various home-prepared brookite powders were characterized by X-ray diffraction analysis, Raman spectroscopy, scanning electron microscopy, UV–vis diffuse reflectance spectroscopy and nitrogen adsorption measurements. The absolute crystallinity was calculated from the ratio between the full width at half maximum intensity of the (121) X-ray diffraction peaks of the brookite samples and the (111) peak of CaF2 as internal standard. The photocatalytic activity of the powders was tested employing the photodegradation of 4-nitrophenol as well…
Fabrication of long period fiber gratings of subnanometric bandwidth.
2017
This paper reports on the fabrication of long period fiber gratings having subnanometric bandwidth in the 1500 nm spectral region. Large gratings have been photo-inscribed in a high NA fiber, the grating pitch and the order of the HE cladding mode are optimized to produce gratings with a large number of periods and preventing the coupling to TE, TM or EH modes. Resonances with a FWHM of 0.83 nm and 0.68 nm have been achieved for gratings 15 and 20 cm long respectively, the free spectral range between transmission notches is 125 nm. The polarization effects and the sensitivity of the gratings to temperature and to strain variations are presented as well. © 2015 Optical Society of America Thi…
Characterization of Different Cable Ferrite Materials to Reduce the Electromagnetic Noise in the 2–150 kHz Frequency Range
2017
The gap of standardization for conducted and field coupled electromagnetic interferences (EMI) in the 2–150 kHz frequency range can lead to Electromagnetic Compatibility (EMC) problems. This is caused by power systems such as Pulse Width Modulation (PWM) controlled rectifiers, photovoltaic inverters or charging battery units in electric vehicles. This is a very important frequency spectral due to interferences generated in a wide range of devices and, specifically, communication problems in the new technologies and devices incorporated to the traditional grid to convert it into a Smart Grid. Consequently, it is necessary to provide new solutions to attenuate this kind of interference, which…
Nonlinear optical properties of silver nanoparticles: separating thermo-optical and Kerr effects
2021
In this paper, we present a study on thermo-optical effect in core-shell silver/thiol-termination ligand nanoparticles. Nanoparticles were dissolved in Dichloromethane. Experimental measurements were carried out using a Z-scan setup. As laser sources we used two 1064 nm lasers: i) 28 ps pulse width laser with 1000 Hz pulse repetition rate; ii) 8 ns pulse width laser with changeable pulse repetition rate 200 – 40 000 Hz. To study what processes lead to refractive index changes we used the polarization-resolved Z-scan method. Comparing ps and ns results showed that response time of single pulse thermal effects for organic solvents depends on beam size while for nanoparticles it corresponds to…